Steps to use fully automatic disposable mask machine to produce masks

The types of protective masks on the market include strap type, inner ear type, outer ear type, etc. The production of these masks requires the use of a mask machine, and the use of a fully automatic disposable mask machine to produce masks has many steps in the entire process.
First of all, we need to use raw materials. The raw materials for disposable masks include PP non-woven fabrics, meltblown fabrics, nose strips, ear straps and other materials. At the same time, we also need mask production equipment, such as a fully automatic disposable mask machine. Mask filming machine, mask ear band spot welding machine and mask packaging machine are used.
After the materials and equipment are complete, disposable masks can be produced. The specific production steps are as follows:
1. The inner mask is formed, which requires the material to be shaped and hot pressed;
2. The outer mask is formed, and the materials used include non-woven fabrics, melt-blown fabrics, activated carbon non-woven fabrics, etc.;
3. Pressing, pressing the inner and outer masks;
4. After cutting the edges and pressing the mask, you need to cut off the excess edges;
5. Nose line fitting, using aluminum strips, rubber strips and other materials for nose line fitting;
6. Earband welding, weld the left and right earbands to the two ends of the mask, generally one is enough;
7. Mask disinfection and packaging.

The above are the steps of using a fully automatic disposable mask machine to produce masks. It can be seen that there are still many steps. You should pay attention to regular maintenance and maintenance of the mask machine when you usually use it.